32 Ford Roadster

Body
Including main body, doors hung and latched, trunk lid hung, floor, dash board, and firewall.

Hand-crafted fiberglass laminate featuring: hand laid layers of fiberglass, durable gelcoat surface and a inner core, providing high strength and superior surface quality. All high stress areas are reinforced with heavy woven roving, (woven strands fiberglass at 90 degrees, used in most boat manufacturing) providing the strongest most durable body in the industry.

No fiberglassing required: all inner components, floor, firewall, trunk liners and door liners are pre-glassed and bonded in place. Doors and trunk liners are bonded together in the molds with custom fixtures for precise and accurate placement.

Door frames and dash are supported with hardwood and plywood inner structure for stability and solid mounting of hinges and latches.

Interior tubular steel structure is added for additional strength and personal protection.

Trunk hinge pivots are steel reinforced, precisely located and fiberglassed in place.

Doors and trunk lid come hinged to the body using taped sandwich plates behind inner liners for strength and adjustability

Doors are latched with bear claw rotary safety latches

We mold our own bodies, to exact outer dimensions using original specifications, utilizing our 27 years experience in the fiberglass industry. Our vast experience allows us to offer bodies in kevlar and kevlar-carbon fiber, bodies are so well aligned that we remove all flash lines (lines formed from seams in multiple piece molds) from the gelcoat surface. All fiberglass components go through our 12 point total cure process, insuring no post cure, and are inspected at each step of production. Every component is machined buffed to insure that the surface is even, flat and shiny.

These features combine to give our customers the highest quality body and ease of assembly.

Frame
Frame rails are reproduced from original design and mig and tig welded for superior strength and durability

106” wheel base

Main rails fabricated from 10 gauge cold finished mild steel

Cross section of main rail at its tallest point is 6” x 1 7/8”

All frame rails are plasma cut to eliminate warpage and to assure uniformity from rail to rail

All holes in frame rails are precisely located and predrilled with a custom fixture

Frame is cross-braced with k member formed from 10 gauge mild steel
K member is designed for ease of routing exhaust, brake lines and fuel lines

Frame rails are boxed for added strength and appearance                                                                                                                            

All blind holes in frame rails for attaching body components have nuts welded in place for ease of assembly

Frames can be set up for stamped and tubular ifs front suspension or straight front axle.

Rear cross member is constructed from 2” x 2” square tubing with 1 ¼” dia. Threaded bar stock for mounting of coilover shocks

Available in pro-street

 

 

Triangulated Rear Suspension:  $395.00
Triangulated four link arms setup for coilover shocks

Each four link arm has a single adjuster for fine tuning rear end location and adjusting of pinion angle.

Link arms are made from 1” diameter .156” heavy wall dom. Tubing with urethane bushings and a inner sleeve to accept 9/16” bolts.

All mounting brackets for attachment to frame and rear end housing are provided.

Fender - running board package $795.00                                                                  
Includes front fenders, rear fenders, running boards and rear panel.

Rear coil-over shocks $375.00
Fully adjustable shocks with matching spring rates

Motor mounts  $125.00
Steel mounts that weld in place and are matched to your motor style and type

Brake pedal and master cylinder bracket  $195.00
Attaches to frame and uses a ¾” oil impregnated bronze bushing as a pivot for the pedal arm .a 3/8” self aligning rod end is used to actuate the master cylinder

Steel hood
Style and price upon request

King bee 12 volt halogen headlights
Chrome  $115.00
Stainless steel  $149.00
Plain steel with SS ring  $115.00

Headlights 7” chrome $95.00

Stainless steel tail lights  $39.95 ea
With blue dot  $44.95 ea

Tail light stands
Plain steel  $44.95 ea
Chrome   $54.95 ea

Windshield frame stock height
Plain steel  $369.95
Chrome  $525.95

Grill   $125.00

Grill with stainless steel insert  $375.00

Front bumpers chrome  $249.95

Rear bumpers chrome  $249.95

Gauges   $375.00
6 gauge set including speedometer, oil pressure, voltmeter, temperature, fuel, tachometer, and fuel sender

Wiring harness $395.95

Steel gas tank, 15 gal $339.95

Stainless steel gas tank $469.95

Poly gas tank $329.95

Turnkeys & Rolling Chassis - pricing upon request